Dlink login : 192 168 0 1 admin login is often confused with 192.168 o 1 login page. Full form of IP address is Internet Protocol Address. This address is a numeric value that assigned to every device like Computer, Printer, Router or any other device that use Internet protocol required for communication. Every communicating device has a particular IP address that has two major functionalities -one is host identification, and other is location tracking. This 192.168.o.1 IP address is the inbuilt IP address of some router. This is an internet protocol version 4 network address. You can change this IP address by using the control panel or management console of routing device or peripherals. This IP address is the default network address of many routers as D-Link,TP-Link.
Dlink login : Go to 192.168.0.1 IP to Login Dlink Router
Brief about 192.168.0.1 IP Login:
This IP address is an internal private network which is being used by many small enterprise or organization to use internet connection. You can connect internally to 254 computer system using this IP address. The range of this IP address is from 192.168.0.1 to 192.168.0.254. By default, manufacturer assign 192.168.0.1 address to all devices. You can change the IP address as per your requirements between this range. You can modify the default IP address through this URL-https://192.168.0.1.
Router Setup Manual:
First of all, I have to say that to connect to your router’s console you don’t need to connect with internet service. You can use the localhost to connect to its management console. D-link router uses this 192.168.0.1, and other routers may use different IP address. Now I am going to provide all required step to configure your router settings.
Check your IP address from Windows PC:
You can check whether your router using 192.168.0.1 from your computer system. Just go to Start button and click on Run. In the text box write this command “cmd” and then hit enter. I will open a black screen, and there write “ipconfig” and click enter. It will show you the router address.
Check your IP address from MAC PC:
In MAC PC type “Terminal” in the search box of your launchpad. Then click on the Terminal icon and click enter. It will open the terminal.app. There write this command “netstat-nr| grep default.”
Login credentials for Router:
Every router would have a default username and password unless your internet service provider changed it. Default username of D-link router is admin and password are blank, and for Netgear, router username is admin and password are 1234 or password.
There needs to change the login details for your router if you don’t want to give access to other to change your router configuration. Now I am going to share how you can modify the username and password of your router.
Open your browser and type this Url http://192.168.0.1 which will redirect you to the router management console.
Log in as an administrator by using the default username and password. We all know default username and password may vary from router to router.
After you clicked on Login button, it will open administrator interface. Now you can change the default password.
In the admin interface, you will find admin tab or router interface tab. Click on the tab where you will find the option to change the password. Always keep in mind, keep variants in your password to make it secure. Further to make the password stronger, you can online password generator.
Steps to connect to a wireless router:
Now a day’s wireless router is growing very popular to all mobile and computer users. This router doesn’t require any connected cable. So now installation widely used in all enterprise. They are using Wi-Fi routers as it is more convenient comparing to conventional routers concerning network traffic. So now I am going to share all information required to set up a wireless router.
Step1: You can directly connect your wireless router to your computer without using any cable but as it is new for you I recommending you first to use Cable to connect to a network. Once successfully connected, open any browser and type the IP address. It will redirect to the console where you will find the username and password.
Step2: After Logged in successfully, a setup wizard will appear. Click on the installation wizard and click on Next tab.
Step3: After you finished the installation, restart the wireless router.
Step4: Now you have to change the wireless setting. You have to modify the default SSID name which in default is the model number of your router. Then go to network configuration settings where you can modify the default username and password as per your convenience. It is very recommended to change default login information to block all to have your router access.
Step5: Now you have to reboot the router to get connect to a wireless network.
Now, I am going to share How to overcome the problem if you can’t be able to get access to 192.168.0.1
If you have faced this issue then the first thing you have to look whether the gateway of your computer is 192.168.0.1 or not. Go to cmd and type “ipconfig.” In some case, it displays the above IP address but fails to connect or unable to show you the router login panel. It might be for Firewall or might be for the network port. To overcome this problem go to cmd screen and type “ping.” Ping command is used to whether your system is connected to the network, and also you can see the speed of the network. If the command failed to display any information or it is time out, then it is sure that your computer is not connected to the router. To overcome this problem, please check-
- Whether you put correct IP address.
- Check whether the router is ON.
- Check your router firewall settings.
D-Link and Netgear router use this IP address. If you ever faced any problem to configure or to connect it to your system then above steps will guide to overcome all your problem. Further, if you have any problem then feel free to comment in the below comment box.